View Rule

View EO 12866 Meetings Printer-Friendly Version     Download RIN Data in XML
EPA/AR RIN: 2060-AP25 Publication ID: Spring 2010 
Title: NESHAP: Group I and IV Polymers and Resins: Amendments 
Abstract: This action amends the final MACT rule for Group IV Polymers and Resins (subpart JJJ) under National Emission Standard for Hazardous Air Pollutants (NESHAP) for thermoplastics (Group IV Polymers and Resins) by addressing a petition by Arteva Specialties for reconsideration concerning subcategorization and the control requirements for leaking equipment. The action will clarify the categorization of polyethylene terephthalate (PET) resin using the continuous terephthalic acid high viscosity multiple end finisher process and determine whether the cost analysis used to regulate leaking equipment should be based on individual component types rather than the aggregated approach used in the final rule. 
Agency: Environmental Protection Agency(EPA)  Priority: Other Significant 
RIN Status: Previously published in the Unified Agenda Agenda Stage of Rulemaking: Long-Term Actions 
Major: No  Unfunded Mandates: Undetermined 
CFR Citation: Not Yet Determined     (To search for a specific CFR, visit the Code of Federal Regulations.)
Legal Authority: Not Yet Determined   
Legal Deadline:  None
Timetable:
Action Date FR Cite
NPRM  To Be Determined    
Additional Information: SAN No. 5280.
Regulatory Flexibility Analysis Required: No  Government Levels Affected: None 
Small Entities Affected: No  Federalism: No 
Included in the Regulatory Plan: No 
RIN Data Printed in the FR: No 
Agency Contact:
Randy McDonald
Environmental Protection Agency
Air and Radiation
D243-02,
RTP, NC 27711
Phone:919 541-5402
Email: Mcdonald.Randy@epa.gov

Ken Hustvedt
Environmental Protection Agency
Air and Radiation
E143-01,
RTP, NC 27711
Phone:919 541-5395
Fax:919 685-3200
Email: Hustvedt.Ken@epamail.epa.gov