<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<REGINFO_RIN_DATA xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" RUN_DATE="2026-04-14-04:00" xsi:noNamespaceSchemaLocation="https://www.reginfo.gov/public/xml/REGINFO_XML_Ver10262011.xsd">
    <RIN_INFO>
        <RIN>2040-AE95</RIN>
        <PUBLICATION>
            <PUBLICATION_ID>201110</PUBLICATION_ID>
            <PUBLICATION_TITLE>The Regulatory Plan and the Unified Agenda of Federal Regulatory and Deregulatory Actions</PUBLICATION_TITLE>
        </PUBLICATION>
        <AGENCY>
            <CODE>2040</CODE>
            <NAME>Water</NAME>
            <ACRONYM>WATER</ACRONYM>
        </AGENCY>
        <PARENT_AGENCY>
            <CODE>2000</CODE>
            <NAME>Environmental Protection Agency</NAME>
            <ACRONYM>EPA</ACRONYM>
        </PARENT_AGENCY>
        <RULE_TITLE>Criteria and Standards for Cooling Water Intake Structures</RULE_TITLE>
        <ABSTRACT><![CDATA[Section 316(b) of the Clean Water Act (CWA) requires EPA to ensure that the location, design, construction, and capacity of cooling water intake structures reflect the best technology available (BTA) for minimizing adverse environmental impacts. Phase II, for existing electric generating plants that use at least 50 MGD of cooling water, was completed in July 2004. Industry and environmental stakeholders challenged the Phase II regulations. On review, the U.S. Court of Appeals for the Second Circuit remanded several key provisions.

In July 2007, EPA suspended the Phase II rule following the decision in the Second Circuit. Several parties petitioned the U.S. Supreme Court to review that decision, and the Supreme Court granted the petitions, limited to the issue of whether the Clean Water Act authorized EPA to consider the relationship of costs and benefits in establishing section 316(b) standards. On April 1, 2009, the Supreme Court reversed the Second Circuit, finding that the Agency may consider cost-benefit analysis in its decisionmaking, but not holding that the Agency must consider costs and benefits in these decisions. 

In June 2006, EPA promulgated the Phase III regulation, covering existing electric generating plants using less than 50 MGD of cooling water, new offshore oil and gas facilities, and all existing manufacturing facilities. Petitions to review this rule were filed in the U.S. Court of Appeals for the Fifth Circuit. In July 2010, the U. S. Court of Appeals for the Fifth Circuit issued a decision upholding EPA's rule for new offshore oil and gas extraction facilities. Further, the court granted the request of EPA and environmental petitioners in the case to remand the existing facility portion of the rule back to the Agency for further rulemaking. EPA expects this new rulemaking would apply to the approximately 1,200 existing electric generating and manufacturing plants. The Fifth Circuit also affirmed that EPA may consider costs in relation to benefits but is not required to do so.

EPA entered into a settlement with the plaintiffs in two lawsuits related to section 316(b) rulemakings. Under the settlement agreement, as modified, EPA agreed to sign a notice of a proposed rulemaking implementing section 316(b) of the CWA at existing facilities no later than March 28, 2011, and to sign a notice taking final action on the proposed rule no later than July 27, 2012. Plaintiffs agreed to seek dismissal of both their suits, subject to a request to reopen the Cronin proceeding in the event EPA failed to meet the agreed deadlines.

EPA's proposed regulation includes uniform controls at all existing facilities to prevent fish from being trapped against screens (impingement), site-specific controls for existing facilities other than new units to prevent fish from being drawn through cooling systems (entrainment), and uniform controls equivalent to closed cycle cooling for new units at existing facilities (also entrainment). Other regulatory options analyzed included similar uniform impingement controls and progressively more stringent requirements for entrainment controls. Another option considered would impose the uniform impingement controls only for facilities withdrawing 50 million or more gallons per day of cooling water, with site-specific impingement controls for facilities withdrawing less than 50 million gallons per day.]]></ABSTRACT>
        <PRIORITY_CATEGORY>Economically Significant</PRIORITY_CATEGORY>
        <RIN_STATUS>Previously Published in The Unified Agenda</RIN_STATUS>
        <RULE_STAGE>Final Rule Stage</RULE_STAGE>
        <MAJOR>Yes</MAJOR>
        <UNFUNDED_MANDATE_LIST>
            <UNFUNDED_MANDATE>Private Sector</UNFUNDED_MANDATE>
        </UNFUNDED_MANDATE_LIST>
        <CFR_LIST>
            <CFR>40 CFR 122</CFR>
            <CFR>40 CFR 125</CFR>
        </CFR_LIST>
        <LEGAL_AUTHORITY_LIST>
            <LEGAL_AUTHORITY>CWA 101</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 301</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 304</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 308</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 316</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 401</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 402</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 501</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>CWA 510</LEGAL_AUTHORITY>
        </LEGAL_AUTHORITY_LIST>
        <LEGAL_DLINE_LIST>
            <LEGAL_DLINE_INFO>
                <DLINE_TYPE>Judicial</DLINE_TYPE>
                <DLINE_ACTION_STAGE>NPRM</DLINE_ACTION_STAGE>
                <DLINE_DATE>03/28/2011</DLINE_DATE>
                <DLINE_DESC> </DLINE_DESC>
            </LEGAL_DLINE_INFO>
            <LEGAL_DLINE_INFO>
                <DLINE_TYPE>Judicial</DLINE_TYPE>
                <DLINE_ACTION_STAGE>Final</DLINE_ACTION_STAGE>
                <DLINE_DATE>07/27/2012</DLINE_DATE>
                <DLINE_DESC> </DLINE_DESC>
            </LEGAL_DLINE_INFO>
        </LEGAL_DLINE_LIST>
        <RPLAN_ENTRY>Yes</RPLAN_ENTRY>
        <RPLAN_INFO>
            <STMT_OF_NEED><![CDATA[In the absence of national regulations, NPDES permit writers have developed requirements to implement section 316(b) on a case-by-case basis. This may result in a range of different requirements, and in some cases, delays in permit issuance or reissuance. This regulation may have substantial ecological benefits.]]></STMT_OF_NEED>
            <LEGAL_BASIS><![CDATA[The Clean Water Act requires EPA to establish best technology available standards to minimize adverse environmental impacts from cooling water intake structures. On February 16, 2004, EPA took final action on regulations governing cooling water intake structures at certain existing power producing facilities under section 316(b) of the Clean Water Act (Phase II rule). 69 FR 41576 (Jul. 9, 2004). These regulations were challenged, and the Second Circuit remanded several provisions of the Phase II rule on various grounds. Riverkeeper, Inc., v. EPA, 475F.3d83, (2d Cir., 2007). EPA suspended most of the rule in response to the remand. 72 FR 37107 (Jul. 9, 2007). The remand of Phase III does not change permitting requirements for these facilities. Until the new rule is issued, permit directors continue to issue permits on a case-by-case, Best Professional Judgment basis for Phase II facilities.]]></LEGAL_BASIS>
            <ALTERNATIVES><![CDATA[This analysis will cover various sizes and types of potentially regulated facilities and control technologies. EPA is considering whether to regulate on a national basis, by subcategory, by broad water body category, or some other basis.]]></ALTERNATIVES>
            <COSTS_AND_BENEFITS><![CDATA[The technologies under consideration in this rulemaking are similar to the technologies considered for the original Phase II and Phase III rules, and costs have been updated to 2009. The annual social costs associated with EPA's proposed regulation are $384 million, plus an additional $15 million in costs associated with the new units provision. The annual social costs of the other options ranged from $327 million to $4.63 billion. EPA monetized only a portion of the expected annual benefits of the rule, amounting to $18 million. The monetized benefits for the other options ranged from $17 to $126 million. EPA is also conducting a stated preference survey to provide a more comprehensive estimate of the monetized benefits and expects to publish a notice of data availability with these results around the end of 2011.]]></COSTS_AND_BENEFITS>
            <RISKS><![CDATA[Cooling water intake structures may pose significant risks for aquatic ecosystems.]]></RISKS>
        </RPLAN_INFO>
        <TIMETABLE_LIST>
            <TIMETABLE>
                <TTBL_ACTION>NPRM</TTBL_ACTION>
                <TTBL_DATE>04/20/2011</TTBL_DATE>
                <FR_CITATION>76 FR 22174</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>NPRM Comment Period End</TTBL_ACTION>
                <TTBL_DATE>07/19/2011</TTBL_DATE>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Reopening Public Comment Period</TTBL_ACTION>
                <TTBL_DATE>07/20/2011</TTBL_DATE>
                <FR_CITATION>76 FR 43230</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Reopening Comment Period End</TTBL_ACTION>
                <TTBL_DATE>08/18/2011</TTBL_DATE>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Final Action</TTBL_ACTION>
                <TTBL_DATE>07/00/2012</TTBL_DATE>
            </TIMETABLE>
        </TIMETABLE_LIST>
        <ADDITIONAL_INFO>EPA publication information: NPRM - http://www.regulations.gov/#!documentDetail; EPA Docket information: EPA-HQ-OW-2008-0667</ADDITIONAL_INFO>
        <RFA_REQUIRED>No</RFA_REQUIRED>
        <SMALL_ENTITY_LIST>
            <SMALL_ENTITY>Businesses</SMALL_ENTITY>
        </SMALL_ENTITY_LIST>
        <GOVT_LEVEL_LIST>
            <GOVT_LEVEL>Federal</GOVT_LEVEL>
            <GOVT_LEVEL>Local</GOVT_LEVEL>
            <GOVT_LEVEL>State</GOVT_LEVEL>
        </GOVT_LEVEL_LIST>
        <FEDERALISM>No</FEDERALISM>
        <ENERGY_AFFECTED>No</ENERGY_AFFECTED>
        <FURTHER_INFO_URL>http://water.epa.gov/lawsregs/lawsguidance/cwa/316b/index.cfm</FURTHER_INFO_URL>
        <NAICS_LIST>
            <NAICS>
                <NAICS_CD>11193</NAICS_CD>
                <NAICS_DESC>Sugarcane Farming</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>111991</NAICS_CD>
                <NAICS_DESC>Sugar Beet Farming</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>211111</NAICS_CD>
                <NAICS_DESC>Crude Petroleum and Natural Gas Extraction</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>211112</NAICS_CD>
                <NAICS_DESC>Natural Gas Liquid Extraction</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>21221</NAICS_CD>
                <NAICS_DESC>Iron Ore Mining</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>212391</NAICS_CD>
                <NAICS_DESC>Potash, Soda, and Borate Mineral Mining</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221111</NAICS_CD>
                <NAICS_DESC>Hydroelectric Power Generation</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221112</NAICS_CD>
                <NAICS_DESC>Fossil Fuel Electric Power Generation</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221113</NAICS_CD>
                <NAICS_DESC>Nuclear Electric Power Generation</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221119</NAICS_CD>
                <NAICS_DESC>Other Electric Power Generation</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221121</NAICS_CD>
                <NAICS_DESC>Electric Bulk Power Transmission and Control</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>221122</NAICS_CD>
                <NAICS_DESC>Electric Power Distribution</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>22121</NAICS_CD>
                <NAICS_DESC>Natural Gas Distribution</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>22133</NAICS_CD>
                <NAICS_DESC>Steam and Air-Conditioning Supply</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311221</NAICS_CD>
                <NAICS_DESC>Wet Corn Milling</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311222</NAICS_CD>
                <NAICS_DESC>Soybean Processing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311225</NAICS_CD>
                <NAICS_DESC>Fats and Oils Refining and Blending</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311311</NAICS_CD>
                <NAICS_DESC>Sugarcane Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311312</NAICS_CD>
                <NAICS_DESC>Cane Sugar Refining</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>311313</NAICS_CD>
                <NAICS_DESC>Beet Sugar Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>31214</NAICS_CD>
                <NAICS_DESC>Distilleries</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>31221</NAICS_CD>
                <NAICS_DESC>Tobacco Stemming and Redrying</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>312229</NAICS_CD>
                <NAICS_DESC>Other Tobacco Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>31321</NAICS_CD>
                <NAICS_DESC>Broadwoven Fabric Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>31332</NAICS_CD>
                <NAICS_DESC>Fabric Coating Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321113</NAICS_CD>
                <NAICS_DESC>Sawmills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321212</NAICS_CD>
                <NAICS_DESC>Softwood Veneer and Plywood Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321219</NAICS_CD>
                <NAICS_DESC>Reconstituted Wood Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321912</NAICS_CD>
                <NAICS_DESC>Cut Stock, Resawing Lumber, and Planing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321918</NAICS_CD>
                <NAICS_DESC>Other Millwork (including Flooring)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>321999</NAICS_CD>
                <NAICS_DESC>All Other Miscellaneous Wood Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3221</NAICS_CD>
                <NAICS_DESC>Pulp, Paper, and Paperboard Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>32212</NAICS_CD>
                <NAICS_DESC>Paper Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>32213</NAICS_CD>
                <NAICS_DESC>Paperboard Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>322291</NAICS_CD>
                <NAICS_DESC>Sanitary Paper Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>32411</NAICS_CD>
                <NAICS_DESC>Petroleum Refineries</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>324199</NAICS_CD>
                <NAICS_DESC>All Other Petroleum and Coal Products Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>325992</NAICS_CD>
                <NAICS_DESC>Photographic Film, Paper, Plate, and Chemical Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>326192</NAICS_CD>
                <NAICS_DESC>Resilient Floor Covering Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>326211</NAICS_CD>
                <NAICS_DESC>Tire Manufacturing (except Retreading)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>326299</NAICS_CD>
                <NAICS_DESC>All Other Rubber Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>32731</NAICS_CD>
                <NAICS_DESC>Cement Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331111</NAICS_CD>
                <NAICS_DESC>Iron and Steel Mills</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331112</NAICS_CD>
                <NAICS_DESC>Electrometallurgical Ferroalloy Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331221</NAICS_CD>
                <NAICS_DESC>Rolled Steel Shape Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331222</NAICS_CD>
                <NAICS_DESC>Steel Wire Drawing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331312</NAICS_CD>
                <NAICS_DESC>Primary Aluminum Production</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331315</NAICS_CD>
                <NAICS_DESC>Aluminum Sheet, Plate, and Foil Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331419</NAICS_CD>
                <NAICS_DESC>Primary Smelting and Refining of Nonferrous Metal (except Copper and Aluminum)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331492</NAICS_CD>
                <NAICS_DESC>Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331521</NAICS_CD>
                <NAICS_DESC>Aluminum Die-Casting Foundries</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331524</NAICS_CD>
                <NAICS_DESC>Aluminum Foundries (except Die-Casting)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>331525</NAICS_CD>
                <NAICS_DESC>Copper Foundries (except Die-Casting)</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332117</NAICS_CD>
                <NAICS_DESC>Powder Metallurgy Part Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332211</NAICS_CD>
                <NAICS_DESC>Cutlery and Flatware (except Precious) Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332212</NAICS_CD>
                <NAICS_DESC>Hand and Edge Tool Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332323</NAICS_CD>
                <NAICS_DESC>Ornamental and Architectural Metal Work Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332439</NAICS_CD>
                <NAICS_DESC>Other Metal Container Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>33251</NAICS_CD>
                <NAICS_DESC>Hardware Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332618</NAICS_CD>
                <NAICS_DESC>Other Fabricated Wire Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332919</NAICS_CD>
                <NAICS_DESC>Other Metal Valve and Pipe Fitting Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>332999</NAICS_CD>
                <NAICS_DESC>All Other Miscellaneous Fabricated Metal Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>333111</NAICS_CD>
                <NAICS_DESC>Farm Machinery and Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>33312</NAICS_CD>
                <NAICS_DESC>Construction Machinery Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>333315</NAICS_CD>
                <NAICS_DESC>Photographic and Photocopying Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>333911</NAICS_CD>
                <NAICS_DESC>Pump and Pumping Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>333922</NAICS_CD>
                <NAICS_DESC>Conveyor and Conveying Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>333923</NAICS_CD>
                <NAICS_DESC>Overhead Traveling Crane, Hoist, and Monorail System Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>336412</NAICS_CD>
                <NAICS_DESC>Aircraft Engine and Engine Parts Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>33651</NAICS_CD>
                <NAICS_DESC>Railroad Rolling Stock Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>337215</NAICS_CD>
                <NAICS_DESC>Showcase, Partition, Shelving, and Locker Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>339914</NAICS_CD>
                <NAICS_DESC>Costume Jewelry and Novelty Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>54171</NAICS_CD>
                <NAICS_DESC>Research and Development in the Physical, Engineering, and Life Sciences</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>61131</NAICS_CD>
                <NAICS_DESC>Colleges, Universities, and Professional Schools</NAICS_DESC>
            </NAICS>
        </NAICS_LIST>
        <PRINT_PAPER>No</PRINT_PAPER>
        <INTERNATIONAL_INTEREST>No</INTERNATIONAL_INTEREST>
        <AGENCY_CONTACT_LIST>
            <CONTACT>
                <FIRST_NAME>Paul</FIRST_NAME>
                <LAST_NAME>Shriner</LAST_NAME>
                <AGENCY>
                    <CODE>2040</CODE>
                    <NAME>Office of Water</NAME>
                    <ACRONYM>OW</ACRONYM>
                </AGENCY>
                <PHONE>202 566-1076</PHONE>
                <EMAIL>Shriner.Paul@epamail.epa.gov</EMAIL>
                <MAILING_ADDRESS>
                    <STREET_ADDRESS>4303T,</STREET_ADDRESS>
                    <CITY>Washington</CITY>
                    <STATE>DC</STATE>
                    <ZIP>20460</ZIP>
                </MAILING_ADDRESS>
            </CONTACT>
            <CONTACT>
                <FIRST_NAME>Julie</FIRST_NAME>
                <LAST_NAME>Hewitt</LAST_NAME>
                <AGENCY>
                    <CODE>2040</CODE>
                    <NAME>Office of Water</NAME>
                    <ACRONYM>OW</ACRONYM>
                </AGENCY>
                <PHONE>202 566-1031</PHONE>
                <EMAIL>hewitt.julie@epamail.epa.gov</EMAIL>
                <MAILING_ADDRESS>
                    <STREET_ADDRESS>Mail Code 4303T, 1200 Pennsylvania Ave., NW.,</STREET_ADDRESS>
                    <CITY>Washington</CITY>
                    <STATE>DC</STATE>
                    <ZIP>20460</ZIP>
                </MAILING_ADDRESS>
            </CONTACT>
        </AGENCY_CONTACT_LIST>
    </RIN_INFO>
</REGINFO_RIN_DATA>
