<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<REGINFO_RIN_DATA xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" RUN_DATE="2026-10-24-04:00" xsi:noNamespaceSchemaLocation="https://www.reginfo.gov/public/xml/REGINFO_XML_Ver10262011.xsd">
    <RIN_INFO>
        <RIN>2050-AE01</RIN>
        <PUBLICATION>
            <PUBLICATION_ID>200310</PUBLICATION_ID>
            <PUBLICATION_TITLE>The Regulatory Plan and the Unified Agenda of Federal Regulatory and Deregulatory Actions</PUBLICATION_TITLE>
        </PUBLICATION>
        <AGENCY>
            <CODE>2050</CODE>
            <NAME>Solid Waste and Emergency Response</NAME>
            <ACRONYM>SWER</ACRONYM>
        </AGENCY>
        <PARENT_AGENCY>
            <CODE>2000</CODE>
            <NAME>Environmental Protection Agency</NAME>
            <ACRONYM>EPA</ACRONYM>
        </PARENT_AGENCY>
        <RULE_TITLE>NESHAPS: Standards for Hazardous Air Pollutants for Hazardous Waste Combustors</RULE_TITLE>
        <ABSTRACT><![CDATA[On September 30, 1999, EPA promulgated standards to control emissions of hazardous air pollutants from incinerators, cement kilns, and lightweight aggregate kilns that burn hazardous waste (referred to as the phase I rule). A number of parties, representing interests of both industry and the environmental community, sought judicial review of the rule. The Court ruled against EPA and vacated the phase I rule. On October 19, 2001, EPA, together with all petitioners, filed a joint motion asking the Court to stay the issuance of its mandate to allow them time to develop interim standards. These stop-gap interim standards were promulgated on February 13 and 14, 2002. They replace the vacated standards temporarily, until revised replacement standards are promulgated by June 15, 2005. This rulemaking will propose and finalize the Phase I replacement standards. Also, in this rulemaking effort, we are developing emission standards for hazardous waste burning industrial, institutional, commercial boilers, process heaters, and hydrochloric acid production furnaces. These sources are referred to as phase II sources because the standards were originally scheduled to be promulgated after phase I source standards were finalized; however, a separate consent decree now requires us to finish developing emission standards for the phase II sources by the same date as those for phase I (June 15, 2005). EPA is developing options for calculating the emission standards that are considered to be consistent with both the statutory requirements and the opinion of the Court. Potential costs and benefits are not yet available, because emission standards must be selected before the cost/benefit analyses begin.pI and phase II sources in December of 2003.]]></ABSTRACT>
        <PRIORITY_CATEGORY>Other Significant</PRIORITY_CATEGORY>
        <RIN_STATUS>Previously Published in The Unified Agenda</RIN_STATUS>
        <RULE_STAGE>Proposed Rule Stage</RULE_STAGE>
        <MAJOR>No</MAJOR>
        <UNFUNDED_MANDATE_LIST>
            <UNFUNDED_MANDATE>No</UNFUNDED_MANDATE>
        </UNFUNDED_MANDATE_LIST>
        <CFR_LIST>
            <CFR>40 CFR 60</CFR>
            <CFR>40 CFR 63</CFR>
            <CFR>40 CFR 260</CFR>
            <CFR>40 CFR 264</CFR>
            <CFR>40 CFR 265</CFR>
            <CFR>40 CFR 266</CFR>
            <CFR>40 CFR 270</CFR>
        </CFR_LIST>
        <LEGAL_AUTHORITY_LIST>
            <LEGAL_AUTHORITY>42 USC 6924 &quot;RCRA 3004&quot;</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>42 USC 6925 &quot;RCRA 3005&quot;</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>42 USC 7412 &quot;CAA 112&quot;</LEGAL_AUTHORITY>
            <LEGAL_AUTHORITY>42 USC 7414 &quot;CAA 114&quot;</LEGAL_AUTHORITY>
        </LEGAL_AUTHORITY_LIST>
        <LEGAL_DLINE_LIST>
            <LEGAL_DLINE_INFO>
                <DLINE_TYPE>Judicial</DLINE_TYPE>
                <DLINE_ACTION_STAGE>NPRM</DLINE_ACTION_STAGE>
                <DLINE_DATE>03/31/2004</DLINE_DATE>
                <DLINE_DESC>Consent decree for Phase 2 portion of rule.</DLINE_DESC>
            </LEGAL_DLINE_INFO>
            <LEGAL_DLINE_INFO>
                <DLINE_TYPE>Judicial</DLINE_TYPE>
                <DLINE_ACTION_STAGE>Final</DLINE_ACTION_STAGE>
                <DLINE_DATE>06/15/2005</DLINE_DATE>
                <DLINE_DESC>Consent decree.</DLINE_DESC>
            </LEGAL_DLINE_INFO>
        </LEGAL_DLINE_LIST>
        <RPLAN_ENTRY>Yes</RPLAN_ENTRY>
        <RPLAN_INFO>
            <STMT_OF_NEED><![CDATA[Section 112 of the Clean Air Act requires that the EPA promulgate regulations requiring the control of hazardous air pollutants from major and certain area sources. The control of hazardous air pollutants is achieved through promulgation of emission standards under sections 112(d) and (f) and, in appropriate circumstances, work practice standards under section 112(h). 

On September 30, 1999 EPA promulgated standards to control emissions of hazardous air pollutants from incinerators, cement kilns, and lightweight aggregate kilns that burn hazardous waste (referred to as the phase I rule). A number of parties, representing interests of both industry and the environmental community, sought judicial review of the rule. The Court ruled against EPA and vacated the phase I rule.]]></STMT_OF_NEED>
            <LEGAL_BASIS><![CDATA[On October 19, 2001, EPA, together with all petitioners, filed a joint motion asking the Court to stay the issuance of its mandate to allow time to develop interim standards. These stop-gap interim standards were promulgated on February 13 and 14, 2002. They replace the vacated standards temporarily, until revised replacement standards are promulgated by June 14, 2005. EPA is working towards promulgation by this date. EPA is also developing emission standards for hazardous waste burning industrial, institutional, commercial boilers, process heaters, and hydrochloric acid production furnaces. These sources are referred to as phase II sources because the standards were originally scheduled to be promulgated after phase I source standards were finalized; however, a separate consent decree now requires us to finish developing emission standards for the phase II sources by the same date as those for phase I (June 14, 2005).]]></LEGAL_BASIS>
            <ALTERNATIVES><![CDATA[EPA is developing options for calculating the emission standards that are considered to be consistent with both the statutory requirements and the opinion of the Court.]]></ALTERNATIVES>
            <COSTS_AND_BENEFITS><![CDATA[Potential costs and benefits are not yet available, because emission standards must be selected before the cost/benefit analyses can be completed. EPA plans to propose emission standards and compliance provisions for both the phase I and phase II sources in March 2004.]]></COSTS_AND_BENEFITS>
            <RISKS><![CDATA[For the 1999 rule, we estimated the avoided incidence of mortality and morbidity associated with reductions in particulate matter (PM) emissions. Estimates of cases of mortality and morbidity avoided were made for children and the elderly, as well as the general population, using concentration-response functions derived from human epidemiological studies. Morbidity effects included respiratory and cardiovascular illnesses requiring hospitalization, as well as other illnesses not requiring hospitalization, such as acute and chronic bronchitis and acute upper and lower respiratory symptoms. For this rule, we are comparing characteristics of the sources covered by the 1999 rule to the sources covered by the replacement rule that are related to risk. These characteristics include emissions, stack characteristics, meteorology, and population. Based on the results of the statistical comparisons, we will infer whether the risks will be about the same, less than, or greater than the 1999 rule. Risk inferences for boilers and HCl production furnaces will be based on comparisons with incinerators for the 1999 rule.]]></RISKS>
        </RPLAN_INFO>
        <TIMETABLE_LIST>
            <TIMETABLE>
                <TTBL_ACTION>NPRM-CK</TTBL_ACTION>
                <TTBL_DATE>04/19/1996</TTBL_DATE>
                <FR_CITATION>61 FR 17358</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Final-Fasttrack</TTBL_ACTION>
                <TTBL_DATE>06/19/1998</TTBL_DATE>
                <FR_CITATION>63 FR 33782</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Final-CK</TTBL_ACTION>
                <TTBL_DATE>09/30/1999</TTBL_DATE>
                <FR_CITATION>64 FR 52828</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>NODA</TTBL_ACTION>
                <TTBL_DATE>07/27/2000</TTBL_DATE>
                <FR_CITATION>65 FR 39581</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>DF 1</TTBL_ACTION>
                <TTBL_DATE>07/03/2001</TTBL_DATE>
                <FR_CITATION>66 FR 35087</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>NPRM-Phase1</TTBL_ACTION>
                <TTBL_DATE>07/03/2001</TTBL_DATE>
                <FR_CITATION>66 FR 35126</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Parallel Proposal</TTBL_ACTION>
                <TTBL_DATE>07/03/2001</TTBL_DATE>
                <FR_CITATION>66 FR 35124</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Direct Final Action</TTBL_ACTION>
                <TTBL_DATE>10/15/2001</TTBL_DATE>
                <FR_CITATION>66 FR 52361</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Final Compliance Extension</TTBL_ACTION>
                <TTBL_DATE>12/06/2001</TTBL_DATE>
                <FR_CITATION>66 FR 63313</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Interim Final Action</TTBL_ACTION>
                <TTBL_DATE>02/13/2002</TTBL_DATE>
                <FR_CITATION>67 FR 6792</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>Final HAP</TTBL_ACTION>
                <TTBL_DATE>02/14/2002</TTBL_DATE>
                <FR_CITATION>67 FR 6968</FR_CITATION>
            </TIMETABLE>
            <TIMETABLE>
                <TTBL_ACTION>NPRM</TTBL_ACTION>
                <TTBL_DATE>03/00/2004</TTBL_DATE>
            </TIMETABLE>
        </TIMETABLE_LIST>
        <ADDITIONAL_INFO>SAN 3333. For information on the Phase I portion of this effort, see SAN 4418, RIN 2050-AE79.</ADDITIONAL_INFO>
        <RFA_REQUIRED>No</RFA_REQUIRED>
        <SMALL_ENTITY_LIST>
            <SMALL_ENTITY>No</SMALL_ENTITY>
        </SMALL_ENTITY_LIST>
        <GOVT_LEVEL_LIST>
            <GOVT_LEVEL>Federal</GOVT_LEVEL>
            <GOVT_LEVEL>State</GOVT_LEVEL>
        </GOVT_LEVEL_LIST>
        <FEDERALISM>No</FEDERALISM>
        <ENERGY_AFFECTED>No</ENERGY_AFFECTED>
        <NAICS_LIST>
            <NAICS>
                <NAICS_CD>3335</NAICS_CD>
                <NAICS_DESC>-</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3343</NAICS_CD>
                <NAICS_DESC>Audio and Video Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3251</NAICS_CD>
                <NAICS_DESC>Basic Chemical Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3273</NAICS_CD>
                <NAICS_DESC>Cement and Concrete Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3271</NAICS_CD>
                <NAICS_DESC>Clay Product and Refractory Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3328</NAICS_CD>
                <NAICS_DESC>Coating, Engraving, Heat Treating and Allied Activities</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3342</NAICS_CD>
                <NAICS_DESC>Communications Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3341</NAICS_CD>
                <NAICS_DESC>Computer and Peripheral Equipment Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>2211</NAICS_CD>
                <NAICS_DESC>Electric Power Generation, Transmission and Distribution</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>45431</NAICS_CD>
                <NAICS_DESC>Fuel Dealers</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3332</NAICS_CD>
                <NAICS_DESC>Industrial Machinery Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3274</NAICS_CD>
                <NAICS_DESC>Lime, Gypsum and Gypsum Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3327</NAICS_CD>
                <NAICS_DESC>Machine Shops, Turned Product, and Screw, Nut and Bolt Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3362</NAICS_CD>
                <NAICS_DESC>Motor Vehicle Body and Trailer Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3361</NAICS_CD>
                <NAICS_DESC>Motor Vehicle Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3363</NAICS_CD>
                <NAICS_DESC>Motor Vehicle Parts Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>2123</NAICS_CD>
                <NAICS_DESC>Non-Metallic Mineral Mining and Quarrying</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3259</NAICS_CD>
                <NAICS_DESC>Other Chemical Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3329</NAICS_CD>
                <NAICS_DESC>Other Fabricated Metal Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3339</NAICS_CD>
                <NAICS_DESC>Other General Purpose Machinery Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3279</NAICS_CD>
                <NAICS_DESC>Other Nonmetallic Mineral Product Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3255</NAICS_CD>
                <NAICS_DESC>Paint, Coating, Adhesive, and Sealant Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3253</NAICS_CD>
                <NAICS_DESC>Pesticide, Fertilizer and Other Agricultural Chemical Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3241</NAICS_CD>
                <NAICS_DESC>Petroleum and Coal Products Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>4227</NAICS_CD>
                <NAICS_DESC>Petroleum and Petroleum Products Wholesalers</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3254</NAICS_CD>
                <NAICS_DESC>Pharmaceutical and Medicine Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3231</NAICS_CD>
                <NAICS_DESC>Printing and Related Support Activities</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>5629</NAICS_CD>
                <NAICS_DESC>Remediation and Other Waste Management Services</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3252</NAICS_CD>
                <NAICS_DESC>Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>3344</NAICS_CD>
                <NAICS_DESC>Semiconductor and Other Electronic Component Manufacturing</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>22132</NAICS_CD>
                <NAICS_DESC>Sewage Treatment Facilities</NAICS_DESC>
            </NAICS>
            <NAICS>
                <NAICS_CD>5622</NAICS_CD>
                <NAICS_DESC>Waste Treatment and Disposal</NAICS_DESC>
            </NAICS>
        </NAICS_LIST>
        <PRINT_PAPER>NA</PRINT_PAPER>
        <INTERNATIONAL_INTEREST>Not Collected</INTERNATIONAL_INTEREST>
        <AGENCY_CONTACT_LIST>
            <CONTACT>
                <FIRST_NAME>Rhonda</FIRST_NAME>
                <LAST_NAME>Minnick</LAST_NAME>
                <AGENCY>
                    <CODE>2050</CODE>
                    <NAME>Office of Land and Emergency Management</NAME>
                    <ACRONYM>OLEM</ACRONYM>
                </AGENCY>
                <PHONE>703 308-8771</PHONE>
                <FAX>703 308-8433</FAX>
                <EMAIL>Minnick.Rhonda@epamail.epa.gov</EMAIL>
                <MAILING_ADDRESS>
                    <STREET_ADDRESS>5302W,</STREET_ADDRESS>
                    <CITY>Washington</CITY>
                    <STATE>DC</STATE>
                    <ZIP>20460</ZIP>
                </MAILING_ADDRESS>
            </CONTACT>
        </AGENCY_CONTACT_LIST>
    </RIN_INFO>
</REGINFO_RIN_DATA>
