View Rule

View EO 12866 Meetings Printer-Friendly Version     Download RIN Data in XML

DOL/OSHA RIN: 1218-AB59 Publication ID: Fall 1998 
Title: Control of Hazardous Energy Sources (Lockout/Tagou(Section 610 Review) 
Abstract: As required by section 610 of the Regulatory Flexibility Act and section 5 of Executive Order 12866, OSHA has reviewed the Agency's standard for the protection of employees from exposure to lockout/tagout hazards, 29 CFR 1910.147, to determine whether the rule should be continued without change or should be amended or rescinded, consistent with the objectives of the rule and of the Occupational Safety and Health Act, to minimize any significant impact on a substantial number of small entities. After a thorough review of the Agency's experience in enforcing this standard, the available literature, and comments received in connection with this review, OSHA has determined that there is a continued need for the rule, that the rule does not appear to overlap, duplicate, or conflict with other Federal rules or with other State and local rules, and that no technological, economic or other factors have arisen since the rule was published that would necessitate amendment or rescission of the rule at this time. OSHA has also concluded that no change that is consistent with the objectives of the OSH Act can be made to the rule that will further minimize any significant impact on a substantial number of small entities. OSHA will be responding to comments received during this review of the standard by preparing materials to assist employers in complying with the rule. 
Agency: Department of Labor(DOL)  Priority: Other Significant 
RIN Status: Previously published in the Unified Agenda Agenda Stage of Rulemaking: Prerule Stage 
Major: No  Unfunded Mandates: No 
RFA Section 610 Review: Section 610 Review 
CFR Citation: 29 CFR 1910.147   
Legal Authority: 29 USC 655(b)    5 USC 553    5 USC 610   
Timetable:
Action Date FR Cite
Begin Review  10/01/1996    
End Review  11/00/1998    
Regulatory Flexibility Analysis Required: No  Government Levels Affected: None 
Included in the Regulatory Plan: No 
Agency Contact:
Marthe B. Kent
Director, Directorate of Safety Standards Programs
Department of Labor
Occupational Safety and Health Administration
Room N3605, 200 Constitution Avenue NW, FP Building,
Washington, DC 20210
Phone:202 693-2222
Fax:202 693-1663