View Rule

View EO 12866 Meetings Printer-Friendly Version     Download RIN Data in XML

EPA/OAR RIN: 2060-AO66 Publication ID: Fall 2018 
Title: Plywood and Composite Wood Products (PCWP) Residual Risk and Technology Review and Amendments 
Abstract:

This action will address the Agency's residual risk and technology review (RTR) of the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Plywood and Composite Wood Products (PCWP). The PCWP NESHAP, subpart DDDD, was promulgated pursuant to section 112(d) of the Clean Air Act (CAA) on July 30, 2004, and was amended on February 16, 2006, and October 29, 2007. The NESHAP established emission limitations and work practice requirements based on maximum achievable control technology (MACT) for controlling emissions of hazardous air pollutants (HAP) emitted from PCWP facilities. PCWP facilities include lumber, plywood, particleboard, medium density fiberboard, hardboard, (structural) fiberboard, oriented strand board (OSB) and engineered wood products manufacturing processes. The HAP emitted include formaldehyde, methanol, acetaldehyde, acrolein, phenol and propionaldehyde. This action will implement the residual risk review requirements of CAA section 112(f)(2) and the technology review requirements of CAA section 112(d)(6). The statute directs the EPA to promulgate emission standards under CAA 112(f)(2) if such standards are required to provide an ample margin of safety to protect public health or to prevent, taking relevant factors into account, an adverse environmental effect. Any such standards are to be promulgated within 8 years after promulgation of MACT standards under CAA section 112(d). CAA section 112(d)(6) requires the EPA to review and revise the MACT standards as necessary, taking into account developments in practices, processes and control technologies, no less often than every 8 years. Pursuant to a court order related to the review of 13 source categories, the EPA must complete 7 final RTR actions by December 31, 2018, and 6 additional RTR actions by June 30, 2020. The EPA currently plans to complete this action by June 30, 2020.

 
Agency: Environmental Protection Agency(EPA)  Priority: Other Significant 
RIN Status: Previously published in the Unified Agenda Agenda Stage of Rulemaking: Proposed Rule Stage 
Major: Undetermined  Unfunded Mandates: Undetermined 
EO 13771 Designation: Regulatory 
CFR Citation: 40 CFR 63   
Legal Authority: 42 U.S.C. 7401 et seq., Clean Air Act   
Legal Deadline:
Action Source Description Date
Final  Judicial  16-cv-00364-CRC; Filed March 22, 2017.  06/30/2020 
Timetable:
Action Date FR Cite
NPRM  07/00/2019 
Final Rule  07/00/2020 
Additional Information: Docket #:EPA-HQ-OAR-2016-0243
Regulatory Flexibility Analysis Required: Undetermined  Government Levels Affected: Federal, Local, State, Tribal 
Federalism: No 
Included in the Regulatory Plan: No 
RIN Information URL: https://www.epa.gov/stationary-sources-air-pollution/plywood-and-composite-wood-products-manufacture-national-emission  
Sectors Affected: 321113 Sawmills; 321211 Hardwood Veneer and Plywood Manufacturing; 321212 Softwood Veneer and Plywood Manufacturing; 321213 Engineered Wood Member (except Truss) Manufacturing; 321219 Reconstituted Wood Product Manufacturing; 321999 All Other Miscellaneous Wood Product Manufacturing 
RIN Data Printed in the FR: No 
Agency Contact:
John Bradfield
Environmental Protection Agency
Office of Air and Radiation
109 T.W. Alexander Drive,
Research Triangle Park, NC 27711
Phone:919 541-3062
Email: bradfield.john@epa.gov

Robin Dunkins
Environmental Protection Agency
Office of Air and Radiation
109 T.W. Alexander Drive, Mail Code E143-03,
Research Triangle Park, NC 27711
Phone:919 541-5335