View Information Collection Request (ICR) Package

OMB Control No: 2060-0486	ICR Reference No: 202302-2060-002
Status: Received in OIRA	Previous ICR Reference No: 202003-2060-004
Agency/Subagency: EPA/OAR	Agency Tracking No: 2056.08
Title: NESHAP for Miscellaneous Metal Parts and Products (40 CFR part 63, subpart MMMM) (Final Rule)
Type of Information Collection: Revision of a currently approved collection	Common Form ICR: No
Type of Review Request: Regular	Date Submitted to OIRA: 02/03/2023

	Requested	Previously Approved
Expiration Date	03/31/2023	12/31/2025
Responses	1,155	780
Time Burden (Hours)	181,934	179,000
Cost Burden (Dollars)	284,000	240,000

Abstract: The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Miscellaneous Metal Parts and Products were proposed on August 13, 2002, promulgated on January 2, 2004, and amended on April 26, 2004, April 20, 2006, and December 22, 2006. The NESHAP is codified at 40 CFR Part 63, Subpart MMMM. This supporting statement addresses information collection activities that will be imposed by the NESHAP for Miscellaneous Metal Parts and Products, including activities added based on the residual risk and technology review (RTR) required under the Clean Air Act (CAA). The NESHAP for Miscellaneous Metal Parts and Products applies to each new and existing affected source of HAP emissions at facilities that are major sources and that perform miscellaneous metal parts and products surface coating operations, and associated equipment or containers used for mixing, conveying, storage, or waste. New facilities include those that commenced construction or reconstruction after August 13, 2002. As part of the RTR for the NESHAP for Miscellaneous Metal Parts and Products, the Environmental Protection Agency (EPA) is not revising the emission limit requirements. The EPA is requiring periodic air emissions testing to measure organic HAP destruction or removal efficiency at the inlet and outlet of the add-on control device, or control device outlet concentration of organic HAP, once every five years for existing and new surface coating affected sources using the emission rate with add-on controls compliance option. The EPA is revising the startup, shutdown, and malfunction (SSM) provisions of the Maximum Achievable Control Technology (MACT) rule and requiring the use of electronic data reporting for future performance test data submittals, notifications, and reports. This information is being collected to assure compliance with 40 CFR Part 63, Subpart MMMM.

Authorizing Statute(s): US Code: 42 USC 7401 et seq. Name of Law: Clean Air Act

Citations for New Statutory Requirements: None

Associated Rulemaking Information
RIN:	Stage of Rulemaking:	Federal Register Citation:	Date:
2060-AT49	Final or interim final rulemaking	85 FR 41100	07/08/2020

Federal Register Notices & Comments
Did the Agency receive public comments on this ICR? No

Number of Information Collection (IC) in this ICR: 1

IC Title	Form No.	Form Name
NESHAP for Miscellaneous Metal Parts and Products (40 CFR part 63, Subpart MMMM)(Renewal)

ICR Summary of Burden

	Total Request	Previously Approved	Change Due to Agency Discretion
Annual Number of Responses	1,155	780	375
Annual Time Burden (Hours)	181,934	179,000	2,934
Annual Cost Burden (Dollars)	284,000	240,000	44,000

Burden increases because of Program Change due to Agency Discretion: Yes

Burden Increase Due to: Changing Regulations

Burden decreases because of Program Change due to Agency Discretion: No

Burden Reduction Due to:

Short Statement: There is an increase in the labor hours per respondent in this ICR as compared to the previous ICR renewal (EPA ICR Number 2056.06). This increase is due to four considerations: 1) an increased labor burden of 4 hours per respondent in year one to become familiar with the amended rules, 2) an increased labor burden of 8 hours per respondent in year one for revising previously developed SSM record systems, 3) an increased labor burden of 8 hours per respondent in year one to become familiar with CEDRI and the electronic reporting form for the semiannual report, and 4) an increased labor burden of 42 hours for three respondents in year three for conducting a performance test and reporting the results. There is an increase in the capital/startup costs as calculated in section 6(b)(iii) compared with the costs in the previous ICR renewal. The requirement for periodic performance testing requires seven existing facilities to conduct a performance test on seven add-on control devices, with an estimate of zero tests being repeated. The seven performance tests are estimated to cost $19,000 each. These facilities are not currently required to perform testing as a condition of their part 70 operating permits.

Annual Cost to Federal Government: $513,280

Does this IC contain surveys, censuses, or employ statistical methods? No

Does this ICR request any personally identifiable information (see OMB Circular No. A-130 for an explanation of this term)? Please consult with your agency's privacy program when making this determination. No

Does this ICR include a form that requires a Privacy Act Statement (see 5 U.S.C. §552a(e)(3))? Please consult with your agency's privacy program when making this determination. No

Is this ICR related to the Affordable Care Act [Pub. L. 111-148 & 111-152]? No

Is this ICR related to the Dodd-Frank Wall Street Reform and Consumer Protection Act, [Pub. L. 111-203]? No

Is this ICR related to the American Recovery and Reinvestment Act of 2009 (ARRA)? No

Is this ICR related to the Pandemic Response? No

Agency Contact: Kaye Whitfield 919 541-2509 whitfield.kaye@epa.gov

View ICR - Agency Submission