View Information Collection Request (ICR) Package

OMB Control No: 2060-0541	ICR Reference No: 202502-2060-032
Status: Active	Previous ICR Reference No: 202001-2060-003
Agency/Subagency: EPA/OAR	Agency Tracking No: 2079.10
Title: NESHAP for Metal Can Manufacturing Surface Coating (40 CFR part 63, subpart KKKK) (Renewal)
Type of Information Collection: Extension without change of a currently approved collection	Common Form ICR: No
Type of Review Request: Regular
OIRA Conclusion Action: Approved without change	Conclusion Date: 03/20/2026
	Date Received in OIRA: 02/28/2025
Terms of Clearance: In accordance with 5 CFR 1320, the information collection is approved for three years.

	Inventory as of this Action	Requested	Previously Approved
Expiration Date	03/31/2029	36 Months From Approved	03/31/2026
Responses	20	0	27
Time Burden (Hours)	1,940	0	1,994
Cost Burden (Dollars)	308,000	0	52,900

Abstract: The National Emission Standards for Hazardous Air Pollutants (NESHAP) for Metal Can Manufacturing Surface Coating were proposed on January 15, 2003, promulgated on November 13, 2003, and most recently amended on February 25, 2020. The latest amendment was a residual risk and technology review (RTR) required of periodic air emissions testing, revisions to the startup, shutdown, and malfunction (SSM) provisions, and the use of electronic data reporting for performance test data submittals notifications, and reports. These regulations apply to existing and new facilities in this source category that use 5,700 liters (1,500 gallons) per year or more of coatings and that is a major source of hazardous air pollutant (HAP). The metal can surface coating source category includes any facilities that coat or print metal cans (including decorative tins), metal ends for metal or composite cans, or metal crowns or closures for any type of can during any stage of the can manufacturing process. The source category does not include the coating of metal coils for cans or can parts. Coil coating for cans and can parts is included in the NESHAP for the surface coating of metal coil (40 CFR Part 63, Subpart SSSS). The source category does not include the coating of pails and drums, which is covered in the NESHAP for the surface coating of miscellaneous metal parts and products (40 CFR Part 63, Subpart MMMM). New facilities include those that commenced construction or reconstruction after January 15, 2003. This information is being collected to assure compliance with 40 CFR Part 63, Subpart KKKK. In general, all NESHAP standards require initial notifications, performance tests, and periodic reports by the owners/operators of the affected facilities. They are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all affected facilities subject to NESHAP.

Authorizing Statute(s): US Code: 42 USC 7401 et seq. Name of Law: Clean Air Act

Citations for New Statutory Requirements: None

Associated Rulemaking Information
RIN:	Stage of Rulemaking:	Federal Register Citation:	Date:
	Not associated with rulemaking

Federal Register Notices & Comments
60-day Notice:	Federal Register Citation:	Citation Date:
	88 FR 31748	05/18/2023
30-day Notice:	Federal Register Citation:	Citation Date:
	90 FR 10900	02/28/2025
Did the Agency receive public comments on this ICR? No

Number of Information Collection (IC) in this ICR: 1

IC Title	Form No.	Form Name
NESHAP for Metal Can Manufacturing Surface Coating (40 CFR part 63, subpart KKKK)

ICR Summary of Burden

	Total Approved	Previously Approved	Change Due to Adjustment in Estimate
Annual Number of Responses	20	27	-7
Annual Time Burden (Hours)	1,940	1,994	-54
Annual Cost Burden (Dollars)	308,000	52,900	255,100

Burden increases because of Program Change due to Agency Discretion: No

Burden Increase Due to:

Burden decreases because of Program Change due to Agency Discretion: No

Burden Reduction Due to:

Short Statement: There is a decrease of 54 hours in the total estimated respondent burden compared with the ICR currently approved by OMB. The previous ICR reflected those burdens and costs associated with the initial activities for subject facilities due to the 2020 amendments. This included time to familiarize with CEDRI for electronic reporting and revision of record systems due to the revisions for periods of startup, shutdown, and malfunction. There is also a decrease in the Capital O&M compared to the previously approved ICR. Most of the Capital O&M included with the previous ICR is associated with capital and startup costs. This ICR, by in large, reflects the on-going burden and costs for existing facilities following rulemaking activities.

Annual Cost to Federal Government: $10,400

Does this IC contain surveys, censuses, or employ statistical methods? No

Does this ICR request any personally identifiable information (see OMB Circular No. A-130 for an explanation of this term)? Please consult with your agency's privacy program when making this determination. No

Does this ICR include a form that requires a Privacy Act Statement (see 5 U.S.C. §552a(e)(3))? Please consult with your agency's privacy program when making this determination. No

Is this ICR related to the Affordable Care Act [Pub. L. 111-148 & 111-152]? No

Is this ICR related to the Dodd-Frank Wall Street Reform and Consumer Protection Act, [Pub. L. 111-203]? No

Is this ICR related to the American Recovery and Reinvestment Act of 2009 (ARRA)? No

Is this ICR related to the Pandemic Response? No

Agency Contact: Muntasir Ali 919 541-0833 ali.muntasir@epa.gov

View ICR - OIRA Conclusion